Audiopipe 12" Double Stack Composite Cone Subwoofer vs Audiopipe 12 Inch 1800 Watt Subwoofer (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This guide compares the audiopipe 12 double stack composite cone subwoofer vs 12 inch 1800. Both are 12-inch Audiopipe subwoofers built for car audio systems. They share similar power handling ratings, with each offering 900 watts RMS. The main difference lies in their voice coil configuration and magnet structure. One model uses a double stack magnet with BASV coils, while the other features a standard dual voice coil setup. You need to check the specific wiring requirements for your amplifier.
Key differences
| Aspect | Audiopipe 12" Double Stack Composite Cone Subwoofer | Audiopipe 12 Inch 1800 Watt Subwoofer |
|---|---|---|
| Voice Coil Type | 2.5-inch BASV dual 4-ohm | 3.3-inch dual voice coil |
| Magnet Structure | Double stack (150 oz) | Not listed |
| Impedance | Dual 4 Ohms | Dual Voice Coil |
| Weight | 23.6 pounds | 21.5 pounds |
Which one should you choose?
Choose Audiopipe 12" Double Stack Composite Cone Subwoofer if
- You want a double stack magnet structure for increased magnetic strength.
- You need specific 2.5-inch BASV dual 4-ohm voice coils.
- You prefer a slightly heavier build for added structural integrity.
Choose Audiopipe 12 Inch 1800 Watt Subwoofer if
- You are looking for a model with a 3.3-inch dual voice coil.
- You want a subwoofer that is slightly lighter at 21.5 pounds.
- You need a standard dual voice coil configuration for your wiring.
Verdict: Choose the Double Stack Composite Cone model if you value the specific BASV voice coil technology and double stack magnet structure for enhanced control. Pick the 1800 Watt model if you prefer a lighter unit with a 3.3-inch dual voice coil design. Both deliver 900 watts RMS, so your choice depends on the specific coil and magnet preferences for your installation.
Voice Coil and Magnet Structure
Magnet structure
The Audiopipe 12" Double Stack Composite Cone Subwoofer features a double stack magnet structure with a 150 oz motor. This design provides increased magnetic strength and improved cone control. The Audiopipe 12 Inch 1800 Watt Subwoofer does not list its magnet weight or structure in the provided data. A heavier magnet typically helps maintain linear excursion at high volumes. You get clear specifications for the first model, which aids in predicting performance under stress. The second model lacks this specific detail, making direct comparison of magnetic efficiency difficult based on the available information alone.
Voice coil size
Voice coil size affects heat dissipation and power handling. The Audiopipe 12" Double Stack Composite Cone Subwoofer uses a 2.5-inch, 4-layer high-temperature Black Aluminum dual voice coil. The Audiopipe 12 Inch 1800 Watt Subwoofer features a larger 3.3-inch 4-layer dual voice coil. Larger coils generally handle more heat and power. This suggests the 1800 Watt model may sustain higher power inputs without overheating. The double stack model offers precise engineering details, but the larger coil on the other unit is a practical advantage for high-power car audio systems.
Impedance configuration
Both subwoofers utilize dual voice coils, but the specific impedance ratings differ. The Audiopipe 12" Double Stack Composite Cone Subwoofer is a dual 4-ohm unit. The Audiopipe 12 Inch 1800 Watt Subwoofer is listed as a dual voice coil model without a specific ohm rating in the key specs. Dual 4-ohm coils allow you to wire them in parallel for a 1-ohm load or in series for an 8-ohm load. This offers flexibility for various amplifiers. The lack of explicit impedance data for the 1800 Watt model makes the first option clearer for wiring planning.
Weight and build
Build quality often correlates with component weight. The Audiopipe 12" Double Stack Composite Cone Subwoofer weighs 23.6 pounds. The Audiopipe 12 Inch 1800 Watt Subwoofer weighs 21.5 pounds. The heavier unit likely contains more robust materials, such as the double stack magnet and composite cone. Both use aluminum baskets, but the first model specifies a powdered black paint finish for ventilation and strength. The extra weight in the double stack model suggests a more substantial motor structure, which can improve transient response and durability.
Frequency response
Frequency response defines the range of bass a subwoofer can reproduce. The Audiopipe 12" Double Stack Composite Cone Subwoofer has a frequency response of 20Hz to 900Hz. The Audiopipe 12 Inch 1800 Watt Subwoofer does not list its frequency response range in the provided specifications. A 20Hz lower limit indicates deep bass capability. The upper limit of 900Hz suggests it can handle some mid-bass frequencies, which might reduce distortion from higher signals. Without data for the second model, the first unit offers verified performance metrics.
Which Audiopipe Subwoofer Suits You
You want precise low-end control
The Double Stack model uses a 150 oz magnet structure and double stack design. This provides stronger magnetic force for better cone control. You get tighter bass response with reduced distortion. The composite cone adds rigidity. This setup delivers reliable performance for demanding car audio systems where accuracy matters more than raw volume.
You need flexible wiring options
This subwoofer features patent pipe multi-connect terminals. These allow secure wiring for series or parallel configurations. You can easily match impedance to your amplifier. The dual 4-ohm voice coil offers more versatility. This makes installation simpler if you are building a custom enclosure or need specific load matching for your head unit or amp.
You prefer a lighter build
The 1800 Watt model weighs 21.5 pounds. This is lighter than the Double Stack version at 23.6 pounds. It still offers 900 watts RMS power handling. The 3.3-inch voice coil is larger than the other model. This may help with heat dissipation. If you want a slightly lighter component with similar power, this is a practical choice for your vehicle.
You want higher max power rating
This subwoofer lists 1800 watts max power. The other model lists 1500 watts max. Both share 900 watts RMS. If you prioritize the higher peak power specification on paper, this model fits. It maintains the same RMS handling. The larger 3.3-inch voice coil may support higher power inputs. This is a straightforward option for high-output systems.
The products compared
Audiopipe 12" Double Stack Composite Cone Subwoofer
Best for: Car audio builds needing dual 4-ohm flexibility
- Woofer Size
- 12"
- Frequency Response
- 20Hz – 900Hz
- Impedance
- Dual 4 Ohms
- Sensitivity
- 88dB
- Size
- 12 Inch
- Weight
- 23.6 pounds
View on Amazon: Audiopipe 12" Double Stack Composite Cone Subwoofer Affiliate link
The Audiopipe 12-inch subwoofer uses a double stack magnet structure for strong low-frequency control. It handles 750 watts RMS and 1500 watts peak power. The dual 4-ohm voice coil aids heat dissipation. You get tight bass from the composite cone. This unit suits car audio builds needing reliable power handling and efficient wiring options.
Pros
- 750 watts RMS power handling
- Double stack magnet structure
- Dual 4-ohm voice coil
- Composite cone for reduced distortion
Cons
- Lower RMS power than 1800-watt competitors
- No remote or app control listed
- Heavy at 23.6 pounds
Good fit if
- You need dual 4-ohm flexibility
- You want high magnet strength
- You prioritize heat dissipation
Skip if
- You require maximum wattage
- You want smart connectivity
- You need a lightweight unit
Verdict: Audiopipe 12" Double Stack Subwoofer delivers solid control for car audio systems. It fits buyers who value magnetic strength and wiring flexibility over raw power numbers.
Audiopipe 12 Inch 1800 Watt Subwoofer
Best for: Car audio systems needing high peak power
- Woofer Size
- 12 inch
- Power Handling
- 1800 watt max, 900 watt RMS
- Impedance
- Dual Voice Coil
- Application
- Cars
- Dimensions
- 15 × 15 × 11 inches
- Weight
- 21.5 pounds
View on Amazon: Audiopipe 12 Inch 1800 Watt Subwoofer Affiliate link
The Audiopipe TXX-BD3-12 is a 12-inch car subwoofer with a 900-watt RMS and 1800-watt max power handling. It uses a 3.3-inch 4-layer dual voice coil for flexible wiring. The unit weighs 21.5 pounds and measures 15 by 11 inches. You should choose this if you need high peak power output for a vehicle audio system.
Pros
- 900-watt RMS power handling
- 1800-watt maximum power rating
- 3.3-inch 4-layer dual voice coil
- Powered black paint aluminum basket
Cons
- 21.5-pound weight adds vehicle load
- No app or remote control listed
- Single size option available
Good fit if
- You need high peak wattage for car audio
- You require dual voice coil flexibility
- You want a compact 12-inch driver
Skip if
- You need a subwoofer for home theater
- You require Bluetooth connectivity
- You prefer a lighter weight unit
Verdict: Audiopipe 12" 1800W Car Subwoofer delivers strong peak power for car audio enthusiasts. It suits buyers who prioritize high wattage ratings and dual voice coil wiring options in a vehicle setup.
Specifications side by side
| Spec | Audiopipe 12" Double Stack Composite Cone Subwoofer | Audiopipe 12 Inch 1800 Watt Subwoofer |
|---|---|---|
| Woofer Size | 12" | 12 inch |
| Power Handling | not stated | 1800 watt max, 900 watt RMS |
| Frequency Response | 20Hz – 900Hz | not stated |
| Impedance | Dual 4 Ohms | Dual Voice Coil |
| Sensitivity | 88dB | not stated |
| Application | not stated | Cars |
| Size | 12 Inch | one size |
| Weight | 23.6 pounds | 21.5 pounds |
| Dimensions | not stated | 15 × 15 × 11 inches |
| Color | Black | BLACK |
| Model | TXX-BDC2-12 | TXXBD312 |
Frequently asked questions
What is the difference between the Audiopipe 12 inch double stack and 1800 watt subwoofers?
The primary difference lies in the magnet structure and voice coil configuration. The Double Stack model features a 150 oz motor with a dual 4-ohm setup. This design offers stronger magnetic force for better cone control. The 1800 Watt model focuses on high peak power handling. It uses a different voice coil configuration to suit various wiring needs in car audio systems.
Which Audiopipe subwoofer has a stronger magnet?
The Audiopipe 12" Double Stack Composite Cone Subwoofer has the stronger magnet. It utilizes a 150 oz motor with a double stack design. This provides increased magnetic strength for improved cone control. The 1800 Watt model does not specify this high-mass magnet structure. You get tighter bass response and reduced distortion with the Double Stack version due to its robust motor assembly.
Does the Audiopipe 12 inch 1800 watt subwoofer have dual voice coils?
Yes, the Audiopipe 12 Inch 1800 Watt Subwoofer supports dual voice coil wiring options. This allows for flexible impedance matching in your car audio system. The Double Stack model also features a dual 4-ohm configuration. Both models offer wiring flexibility, but the 1800 Watt version prioritizes high peak power ratings alongside this versatile coil setup for various amplifier connections.
Which subwoofer is heavier, the double stack or the 1800 watt?
The Audiopipe 12" Double Stack Composite Cone Subwoofer is heavier. It weighs 23.6 pounds. The Audiopipe 12 Inch 1800 Watt Subwoofer weighs 21.5 pounds. The extra weight in the Double Stack model likely comes from its larger 150 oz magnet structure. This additional mass contributes to the stronger magnetic force and improved cone control you get from this specific unit.
What size are these Audiopipe subwoofers?
Both subwoofers are 12 inches in size. The Audiopipe 12" Double Stack Composite Cone Subwoofer is listed as a 12-inch pack. The Audiopipe 12 Inch 1800 Watt Subwoofer is also a 12-inch unit. This standard size fits most common car audio enclosures. You can use either model in a 12-inch compatible box for your vehicle setup.
Can I use the Audiopipe double stack subwoofer in a sealed enclosure?
Yes, the Audiopipe 12" Double Stack Composite Cone Subwoofer works well in sealed enclosures. Its 150 oz magnet structure provides strong control for tight bass response. The dual 4-ohm configuration allows for flexible wiring. This model is best for builds needing precise low-end control. You get reduced distortion and solid performance in sealed boxes compared to vented designs.
What is the model number for the Audiopipe 12 inch 1800 watt subwoofer?
The model number is TXXBD312. This identifies the Audiopipe 12 Inch 1800 Watt Subwoofer. It is designed for cars and offers high peak power. The Double Stack model has the model number TXX-BDC2-12. You can use these codes to verify compatibility with your existing car audio system or amplifier settings.