Audiopipe 8" Competition Subwoofer Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This audiopipe 8 competition subwoofer review covers the TXX-BDX-8 model. It is an 8-inch driver built for high output. The unit handles 500 watts RMS and peaks at 1000 watts. It uses a dual 4-ohm voice coil. The 85dB sensitivity rating suggests it needs adequate amplifier power to reach its potential. The frequency response extends from 40Hz to 2,000Hz. This specification range indicates strong low-end focus with some upper-mid presence. The design includes two magnets for stability. You get a black aluminum basket for rigidity. This combination aims for endurance under heavy load. The product is engineered for competition or high-volume listening.
What stands out
- Dual 4-ohm 2-inch black aluminum voice coil with improved ventilation
- 150 oz dual magnet structure for strong power handling
- 1000W peak and 500W RMS power handling capacity
- Patent pipe multi-connect terminals for flexible series or parallel wiring
- Vented holes on the T-yoke for enhanced heat dissipation
Who it fits
Good fit for
You should consider this subwoofer if you are building a competition audio system or a high-output car audio setup. The dual 4-ohm configuration allows you to wire two units for a 1-ohm load, maximizing power delivery from your amplifier. If you prefer black components for a clean look, the black aluminum basket and stitching surround fit well. The robust heat management features suit drivers who run high volumes for long periods. It is ideal for those who prioritize raw power handling and thermal endurance over subtle, nuanced bass reproduction.
Who should skip it
You should look at another option if you need a subwoofer for a small, sealed enclosure where tight, accurate bass is critical. The 85dB sensitivity is moderate, meaning you need a powerful amplifier to drive it effectively. If you prefer a simpler single 4-ohm or single 2-ohm wiring scheme, this dual 4-ohm design may complicate your installation. The wide frequency response up to 2,000Hz is unusual for a dedicated subwoofer and may not suit purists who want only deep low frequencies. Additionally, the 23.1-pound weight requires sturdy mounting solutions.
Verdict: The Audiopipe TXX-BDX-8 is a rugged, high-power driver designed for demanding applications. Its dual 4-ohm coil and robust cooling make it a solid choice for high-output builds.
Audiopipe 8 Key Specs Explained
Power Handling: 1000W peak, 500W RMS
RMS power indicates the continuous wattage the subwoofer can handle safely, while peak power shows the maximum burst it can endure. You need an amplifier that matches the 500W RMS rating for reliable daily use. This specification ensures the driver does not fail under normal listening conditions. Compare this with other subs to ensure your amp provides sufficient clean power without overdriving the unit.
Impedance: 2 x 4 Ohms
This dual 4-ohm configuration allows flexible wiring options. You can connect the voice coils in series or parallel to achieve a total impedance of 2 ohms or 8 ohms. This flexibility helps you match the subwoofer to various amplifier outputs. It is useful if you plan to wire multiple subs together or need to adjust the load for your specific amplifier's stability.
Woofer Size: 8"
The 8-inch diameter defines the physical size of the driver and its cone area. Smaller drivers like this require less enclosure space than 12-inch or 15-inch models. This makes the Audiopipe suitable for compact installations where space is limited. However, larger drivers generally move more air. You should compare this size against your available box volume to ensure proper acoustic performance.
Sensitivity: 85dB
Sensitivity measures how efficiently the subwoofer converts amplifier power into sound volume. An 85dB rating is moderate, meaning it requires adequate amplifier power to reach high volume levels. You should pair this sub with an amp that can deliver consistent current. Lower sensitivity ratings often demand more power for the same output compared to higher rated models, affecting your system design.
Frequency Response: 40-2,000Hz
This range indicates the frequencies the subwoofer can reproduce, from deep bass at 40Hz up to mid-range tones at 2,000Hz. The 40Hz lower limit suggests it can produce noticeable low-end rumble. The upper limit is unusually high for a dedicated sub, indicating the driver may handle some mid-bass frequencies. This broad range allows it to cover more spectral ground than standard subs focused solely on sub-20Hz output.
Design And Build Quality
The listing describes an aluminum basket finished in black powder coat. This material choice aims to provide rigidity while resisting corrosion. You get an injection molded polypropylene dust cap and a stitched surround. The stitching reinforces the cone structure, which the manufacturer states extends the unit's lifespan under heavy use. Vent holes on the T-yoke are included to help dissipate heat. This design feature supports better sound quality by reducing thermal compression during extended sessions.
According to the listing, the subwoofer measures 8.7 inches wide, 7.5 inches tall, and 5.8 inches deep. It weighs 23.1 pounds. The dual 4-ohm voice coil is made of high-temperature black aluminum. This four-layer coil is engineered for improved ventilation. The patent pipe multi-connect terminals allow you to wire the driver in parallel or series configurations. This layout simplifies installation in custom enclosures where impedance matching is critical.
The unit is available in black. Other variations exist with different sizes and impedances. The 8-inch model fits into smaller spaces than larger competitors. Its compact depth and moderate weight make it easier to mount in tight car doors or small sealed boxes. The sturdy basket and stitched surround suggest it is built for competition use rather than casual listening. You should verify your enclosure dimensions against these measurements before purchasing to ensure a proper fit.
Setup And Everyday Use
Installation begins with mounting the driver into a properly sealed enclosure. The physical dimensions are 8.7 inches wide, 7.5 inches high, and 5.8 inches deep. The unit weighs 23.1 pounds, so you need sturdy mounting hardware to secure the aluminum basket. The black powder-coated finish resists corrosion, which is useful in humid environments or under-dash applications.
Wiring is straightforward thanks to the patent pipe multi-connect terminals. These allow you to configure the dual 4-ohm voice coils in either parallel or series. This flexibility lets you match the impedance to your amplifier’s requirements. You can achieve a 1-ohm or 2-ohm load depending on your amp’s stability. The 2-inch voice coil height provides ample travel for high output.
Daily use involves powering the sub with an amplifier capable of delivering 500 watts RMS. The 85dB sensitivity rating means you need sufficient wattage to drive it efficiently. It does not require excessive gain to reach high volume levels. The vented holes on the T-yoke enhance heat dissipation during extended listening sessions. This design helps maintain performance and reduces distortion when playing loud bass frequencies.
The frequency response extends from 40Hz to 2,000Hz. While primarily designed for low-end reproduction, the upper range allows for some mid-bass definition. The stitched surround reinforces the cone, ensuring longevity during heavy use. You get reliable performance whether you are listening to music at moderate levels or pushing the system to its limits.
Before You Buy Audiopipe 8
You must verify your amplifier output matches the 500-watt RMS rating. The dual 4-ohm voice coil allows flexible wiring in series or parallel. This helps you adjust total impedance to fit your amp’s stable range. The 85dB sensitivity is modest, so you need sufficient power to drive it effectively. Check your enclosure volume against manufacturer recommendations for the 8-inch size. The aluminum basket adds weight, so ensure your mounting surface is rigid. Regularly inspect the stitched surround for wear, especially in hot climates. The vented T-yoke aids heat dissipation, but keep the area clear of debris. This model sits alongside larger 12-inch and 15-inch options in the 1 product lineup. Larger variants offer deeper bass but require more space. If you need compact high-output performance, this 8-inch driver is a strong contender. Maintain clean connections at the patent pipe terminals to prevent signal loss. Avoid exceeding the peak power limits during sudden bursts. This practical approach ensures longevity and consistent sound quality from your system.
Check before you buy
- Verify amplifier RMS output matches 500 watts.
- Check enclosure volume for 8-inch driver compatibility.
- Confirm wiring allows correct impedance load.
- Ensure mounting surface supports 23.1 pounds.
The product at a glance
Audiopipe 8" Competition Subwoofer
Best for: Competition builds needing dual 4-ohm flexibility
- Woofer Size
- 8"
- Power Handling
- 1000W peak, 500W RMS
- Frequency Response
- 40-2,000Hz
- Impedance
- 2 x 4 Ohms
- Sensitivity
- 85dB
- Dimensions
- 5.8 × 8.7 × 7.5 inches
View on Amazon: Audiopipe 8" Competition Subwoofer Affiliate link
The Audiopipe TXX-BDX-8 is an 8-inch competition subwoofer designed for high power handling. It features a dual 4-ohm voice coil and 500 watts of RMS power. The unit uses a 150-ounce dual magnet system and aluminum basket for durability. Its frequency response reaches 2,000 Hz. This subwoofer suits buyers who need a compact, high-output driver for tight enclosures or specific competition builds.
Pros
- 500 Watts RMS power handling for strong output
- Dual 4-ohm voice coil allows flexible wiring options
- 150-ounce dual magnet system ensures stability
- Aluminum basket with vented T-yoke improves heat dissipation
Cons
- 85 dB sensitivity is lower than many consumer subs
- 23.1-pound weight adds significant load to vehicle
- No included mounting hardware or amplifier listed
Good fit if
- You need a dual 4-ohm sub for series/parallel wiring
- You are building a compact competition enclosure
- You prioritize power handling over raw efficiency
Skip if
- You require high sensitivity for low-power head units
- You need a lightweight sub for fuel efficiency
- You want a plug-and-play complete speaker system
Verdict: Audiopipe TXX-BDX-8 8-Inch Subwoofer fits builders who need a durable, high-power driver for specific wiring configurations. Its robust magnet and coil design support intense use in competition settings.
Specifications side by side
| Spec | Audiopipe 8" Competition Subwoofer |
|---|---|
| Woofer Size | 8" |
| Power Handling | 1000W peak, 500W RMS |
| Frequency Response | 40-2,000Hz |
| Impedance | 2 x 4 Ohms |
| Sensitivity | 85dB |
| Dimensions | 5.8 × 8.7 × 7.5 inches |
| Weight | 23.1 pounds |
| Size | 8" (2*4 Ohms) |
| Color | Black |
| Model | TXX-BDX-8 |
Frequently asked questions
What is the exact model number for the Audiopipe 8 competition subwoofer?
The specific model number is TXX-BDX-8. This identifier helps you locate the correct driver for your build. It ensures you are purchasing the dual 4-ohm version designed for competition use. Matching the model number prevents wiring errors.
How heavy is the Audiopipe 8 inch subwoofer?
The driver weighs 23.1 pounds. This substantial mass requires robust mounting hardware in your enclosure. You must secure the aluminum basket firmly to handle the weight and vibration. Heavy construction often contributes to the rigidity needed for high-output applications.
What are the physical dimensions of this subwoofer?
The unit measures 8.7 inches wide, 7.5 inches high, and 5.8 inches deep. These dimensions dictate the minimum box size you need. Ensure your enclosure has enough internal volume and clearance for these exact measurements. Proper fitment is critical for performance.
Does this subwoofer have a dual 4-ohm voice coil?
Yes, it features a dual 4-ohm voice coil configuration. This setup gives you wiring flexibility for your amplifier. You can wire the coils in series or parallel to match your amp’s impedance requirements. This adaptability is key for competition builds with varying power supplies.
What material is the basket made of for this model?
The basket is constructed from aluminum with a black powder coat finish. Aluminum provides high rigidity while keeping weight manageable compared to steel. The powder coat adds corrosion resistance. This durable build supports the intense usage typical in competition environments.
What type of surround does the Audiopipe 8 use?
It uses a stitched surround. Stitching reinforces the cone structure for durability. This design helps the driver withstand high excursion levels. The stitched surround is a common feature in competition subwoofers built for high output and long-term reliability.