Audiopipe 12 Inch 1800 Watt Subwoofer Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This audiopipe txxbd312 1800 watt car subwoofer review covers the key details you need. The Audiopipe TXXBD312 is a 12-inch car subwoofer designed for high-output audio systems. It features a maximum power handling of 1800 watts and a continuous RMS rating of 900 watts. These figures define its capability to move air in your vehicle. The unit uses a dual voice coil configuration for flexible amplifier matching. It weighs 21.5 pounds and measures 15 inches wide by 15 inches long. This build targets drivers seeking substantial bass impact from a single driver.
What stands out
- 1800 Watt MAX power handling for high output
- 900 Watt RMS continuous power rating
- 12-inch woofer size for deep bass response
- Dual voice coil design for wiring flexibility
- 3.3-inch 4-layer dual voice coil TIL
Who it fits
Good fit for
This subwoofer suits car audio enthusiasts who want maximum bass impact from a single 12-inch driver. It is ideal for setups where you have an amplifier capable of delivering high wattage, given its 1800-watt max rating. The dual voice coil allows you to wire it in series or parallel to match your amp's output. If you prioritize raw power handling and deep low-end extension in your vehicle, this model fits your needs.
Who should skip it
You should look elsewhere if you need a compact installation, as this unit measures 15 by 15 inches and weighs 21.5 pounds. It is not suitable for tight enclosures or vehicles with limited cargo space. Additionally, if you prefer a subwoofer with a single voice coil for simpler wiring, the dual coil configuration here may add complexity. Those seeking a lightweight or small-footprint solution will find this model too large and heavy for their specific car audio constraints.
Verdict: The Audiopipe TXXBD312 delivers high power handling in a standard 12-inch form factor. It is a solid choice for car owners prioritizing raw bass output and flexible wiring options.
Key specs for this subwoofer
Woofer Size: 12 inch
A 12-inch cone moves more air than smaller drivers. This size offers a balance between deep bass extension and enclosure space. You get substantial low-end impact without requiring a massive box. It fits in most standard car trunks or rear decks. If you want punchy, noticeable bass in a compact form, this diameter is a practical choice for most vehicles.
Power Handling: 1800 watt max, 900 watt RMS
The 900-watt RMS rating shows the continuous power the sub can handle safely. This is the number you match with your amplifier. The 1800-watt max indicates peak capacity for short bursts. You should choose an amp that delivers around 900 watts RMS for clean, reliable performance. This ensures the driver stays within safe operating limits during regular use.
Impedance: Dual Voice Coil
Dual voice coils allow flexible wiring options. You can wire them in series or parallel to change the total impedance. This lets you match the sub to different amplifiers. It also makes it easier to achieve lower impedance loads for more power. This feature gives you control over how you integrate the sub into your existing car audio setup.
Voice Coil: 3.3" 4-Layer Dual Voice Coil
A 3.3-inch voice coil provides a larger surface area for heat dissipation. The four-layer winding adds durability and power handling capacity. This construction helps prevent overheating during high-volume listening. It supports the 900-watt RMS rating by managing thermal stress. This design detail suggests the sub can handle demanding audio signals without compromising structural integrity.
Design and build specs
The Audiopipe TXXBD312 features a powered black paint aluminum basket. According to the listing, this construction provides structural rigidity for the 12-inch driver. Aluminum baskets resist warping under high power, which helps maintain consistent sound quality. The black paint finish offers a clean look that blends well with most car interiors. You get a durable enclosure that protects the internal components from vibration and heat. The woofer size is fixed at 12 inches, which requires a specific enclosure volume. You must plan your installation space carefully to accommodate this driver diameter.
The physical dimensions are 15 inches in width and length, with a height of 11 inches. This footprint means you need a dedicated area in your vehicle trunk or cargo space. The unit weighs 21.5 pounds. This weight adds mass to your audio system, which can help reduce unwanted resonance in the mounting surface. You will need secure mounting points to support this load during driving. The application is listed strictly for cars. This confirms the design is optimized for automotive electrical systems and vibration environments. You should not expect it to work in home theater setups without significant modification. The single size option limits your choice but simplifies the purchasing decision. You know exactly what you are getting in terms of physical space requirements.
Setup and everyday use
Installing this Audiopipe TXXBD312 requires careful planning. The driver measures 15 inches in width and 15 inches in length, with a height of 11 inches. You must ensure your vehicle enclosure accommodates these dimensions. The unit weighs 21.5 pounds, so you need a sturdy mounting solution. This weight helps stabilize the subwoofer during high-output operation, but it also means you should secure the box firmly to prevent vibration damage.
The dual voice coil configuration offers wiring flexibility. You can wire the coils in series or parallel to match your amplifier’s output impedance. This setup allows you to load your amplifier correctly for optimal performance. The 4-layer dual voice coil design helps manage heat and power delivery efficiently.
For daily use, the 900-watt RMS rating indicates continuous power handling. You can drive this subwoofer hard without risking immediate damage, provided your amplifier is set correctly. The 1800-watt maximum rating shows peak capability, which is useful for short bursts of high-energy music. The powered black paint aluminum basket adds durability. This construction resists warping, ensuring the cone remains centered even under heavy stress.
Since this is designed for cars, you will install it in a vehicle trunk or cargo area. The single size option means you do not need to choose between different cone diameters. The black color matches most standard subwoofer boxes and vehicle interiors. You simply connect the amplifier, tune the enclosure, and enjoy the bass.
Before you buy this subwoofer
You must pair this driver with a capable amplifier. The 900-watt RMS rating requires an amp that can deliver clean power at the correct impedance. This unit uses a dual voice coil, so you need to verify your amplifier supports dual-coil configurations or plan your wiring carefully. The 15-by-15-inch footprint demands a properly sized enclosure. Standard boxes may not fit this driver, so check your custom box dimensions against the 11-inch height. You also need to ensure your vehicle’s electrical system can handle the current draw. Regularly inspect the voice coils and suspension for wear. This model fits best in dedicated car audio builds. It does not fit home theater setups or powered speaker cabinets. Compare it against other 12-inch options if you need compact enclosures or passive radiators.
Check before you buy
- Verify amplifier RMS output matches 900 watts.
- Confirm dual voice coil compatibility with your amp.
- Measure enclosure space for 15x15x11 inch dimensions.
- Check vehicle electrical system capacity for high current.
The product at a glance
Audiopipe 12 Inch 1800 Watt Subwoofer
Best for: high-power car audio bass installation
- Woofer Size
- 12 inch
- Power Handling
- 1800 watt max, 900 watt RMS
- Impedance
- Dual Voice Coil
- Application
- Cars
- Dimensions
- 15 × 15 × 11 inches
- Weight
- 21.5 pounds
View on Amazon: Audiopipe 12 Inch 1800 Watt Subwoofer Affiliate link
The Audiopipe TXXBD312 is a 12-inch car subwoofer built for high output. It handles 900 watts RMS and peaks at 1800 watts. The dual voice coil design offers wiring flexibility. A black aluminum basket supports the driver. Weighing 21.5 pounds, it fits standard car audio installations. This subwoofer suits drivers seeking powerful bass response in a vehicle.
Pros
- 900 watts RMS power handling
- 12-inch woofer size for deep bass
- Dual voice coil for flexible wiring
- Powered black paint aluminum basket
Cons
- 21.5 pounds is heavy for some installations
- 1800 watts is peak, not continuous power
- Single size option limits fitment choices
Good fit if
- You need a 12-inch subwoofer for a car
- You want high RMS power handling
- You prefer dual voice coil flexibility
Skip if
- You require a compact 10-inch subwoofer
- You need a lightweight unit under 15 pounds
- You are installing in a home theater
Verdict: Audiopipe 12-Inch 900W RMS Car Subwoofer delivers strong bass for car audio enthusiasts. It fits buyers who prioritize high power handling and dual voice coil wiring options in a 12-inch format.
Specifications side by side
| Spec | Audiopipe 12 Inch 1800 Watt Subwoofer |
|---|---|
| Woofer Size | 12 inch |
| Power Handling | 1800 watt max, 900 watt RMS |
| Impedance | Dual Voice Coil |
| Application | Cars |
| Dimensions | 15 × 15 × 11 inches |
| Weight | 21.5 pounds |
| Size | one size |
| Color | BLACK |
| Model | TXXBD312 |
Frequently asked questions
What is the exact model number for this Audiopipe subwoofer?
The model number is TXXBD312. You can find this identifier on the product listing and packaging. It distinguishes this 12-inch driver from other Audiopipe variants. Knowing the exact model helps you locate compatible mounting templates and wiring diagrams online.
Does the Audiopipe TXXBD312 come in colors other than black?
No, this subwoofer is available only in black. The basket features a powered black paint finish. This standard color choice ensures it blends into most custom enclosures without drawing attention. You do not need to worry about matching other accent colors.
How heavy is the Audiopipe 12-inch subwoofer?
The unit weighs 21.5 pounds. This mass provides stability during high-output operation. You must secure it properly in your vehicle to prevent movement. The weight also contributes to the structural integrity of the driver assembly under heavy bass loads.
What are the physical dimensions of this subwoofer?
The subwoofer measures 15 inches in width and 15 inches in length. The height is 11 inches. These dimensions determine the minimum enclosure size required. You must check your vehicle space against these measurements before installation to ensure a proper fit.
Is this subwoofer designed for car audio systems?
Yes, it is designed specifically for cars. The application is listed as automotive use. It is built to handle the vibrations and power demands typical of mobile audio environments. This focus ensures the driver performs reliably in vehicle enclosures.
What size cone does the Audiopipe TXXBD312 use?
It uses a 12-inch cone. This size is a common standard for car audio installations. A 12-inch driver offers a balance between deep bass extension and enclosure space. You get substantial low-end impact without requiring a massive box.