Audison APS 10D Prima Series Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This audison aps 10d prima series review focuses on the APS 10D, a 10-inch subwoofer built for sealed enclosures. It handles 400W continuous and 800W peak power with a dual 4-ohm voice coil. The unit weighs 5.51 pounds and measures 11.8 inches per side. Its high-density flux ferrite magnet supports this power handling. You get a compact driver that fits in tight spaces while delivering solid low-frequency output for your audio system.
What stands out
- 10-inch woofer size for compact installation
- 400W continuous and 800W peak power handling
- Dual 4-ohm voice coil configuration
- Designed specifically for sealed enclosures
Who it fits
Good fit for
You should consider this subwoofer if you have a sealed box with at least 0.35 cubic feet of space. It suits car audio enthusiasts who want a compact footprint without sacrificing power. The dual 4-ohm design offers wiring flexibility for various amplifiers. If you prioritize tight, controlled bass in a small enclosure, this driver meets those needs effectively.
Who should skip it
Skip this model if you need a subwoofer for a ported or vented enclosure, as it is designed strictly for sealed setups. You should also look elsewhere if you require a larger 12-inch driver for deeper extension. The 84-ohm sensitivity rating suggests it may need more amplifier power to reach high volume levels compared to higher-sensitivity alternatives.
Verdict: The Audison APS 10D is a capable sealed subwoofer for tight spaces. It offers solid power handling and wiring flexibility for specific installations.
Key specs explained
Woofer Size: 10"
A 10-inch driver offers a balance of deep bass and compact footprint. This size fits well in smaller sealed enclosures, making it ideal for vehicles with limited trunk space. You get substantial low-frequency output without requiring a massive cabinet. Compare this to 12-inch models if you need more displacement, but keep in mind that larger drivers demand more enclosure volume.
Impedance: 4 Ω + 4 Ω
This dual 4-ohm voice coil configuration allows flexible wiring options. You can wire the coils in series for an 8-ohm load or in parallel for a 2-ohm load. This flexibility lets you match the subwoofer to various amplifier outputs. It provides control over power delivery and ensures compatibility with a wider range of car audio amplifiers than single-coil designs.
Power Handling: 400W Continuous, 800W Peak
Continuous power indicates the sustained wattage the subwoofer can handle safely during regular use. Peak power shows the maximum short-term burst it can withstand. Aim for an amplifier that delivers close to the continuous rating for optimal performance and longevity. This rating helps you select an amp that drives the unit hard without risking thermal damage to the voice coil.
Sensitivity: 84 Ohms
The listing cites 84 Ohms for sensitivity, which is an unusual unit for this metric. Typically, sensitivity is measured in decibels (dB) to indicate how loudly a subwoofer plays with a given power input. High sensitivity means more volume from less power. If this value is accurate, it suggests moderate efficiency. Compare it with other models to gauge how much amplifier power you will need for your desired volume levels.
Design and Build Specifications
The Audison APS 10D Prima Series is a compact, cube-shaped subwoofer designed for sealed enclosures. According to the listing, the unit measures 11.8 inches in width, height, and length. This uniform cubic footprint simplifies installation in tight spaces, such as under seats or in small trunks. You do not need to account for irregular shapes when planning your enclosure cutout or mounting bracket.
The driver weighs 5.51 pounds, which is relatively light for a 10-inch subwoofer. This lower mass can help the cone respond quickly to transient signals, potentially improving clarity in complex musical passages. The finish is black, a standard choice that helps the unit blend into most vehicle interiors or custom enclosures without drawing attention away from the audio experience.
Internally, the design relies on a high-density flux ferrite magnet. This material provides a stable magnetic field without the excessive weight of neodymium alternatives. The dual 4-ohm voice coil configuration allows for flexible wiring options, letting you pair the sub with various amplifiers. Whether you wire it in series or parallel, the 4-ohm impedance ensures compatibility with many common car audio systems. The sealed enclosure requirement means you must build or buy a box that maintains a minimum volume of 0.35 cubic feet to achieve the intended performance.
Setup and daily use guide
Installing the Audison APS 10D requires a sealed enclosure with a minimum volume of 0.35 cubic feet. This constraint is critical for proper operation. The dual 4-ohm voice coil allows flexible wiring options. You can wire the coils in series or parallel to achieve different total impedance loads. This flexibility helps you match the subwoofer to various amplifier outputs. The 400W continuous power handling rating suggests the unit is designed for sustained bass reproduction. It can manage 800W peak power for short bursts. This specification indicates it can handle dynamic musical peaks without damage, provided the amplifier is properly tuned. The 84 dB sensitivity rating means the subwoofer requires adequate amplifier current to reach high volume levels efficiently. You will need an amplifier capable of delivering clean power to drive this unit effectively. The ferrite magnet provides a stable magnetic field, which contributes to consistent performance over time. The compact 11.8-inch cube design simplifies mounting in tight spaces. You can secure it easily in small enclosures under seats or in trunks. The black finish blends well with most interior environments. Daily use involves integrating this component into your existing audio system. The sealed enclosure design ensures tight, accurate bass response. This makes it suitable for listeners who prioritize precision over sheer volume. The 5.51-pound weight is manageable for most installation scenarios. You should ensure the enclosure is airtight to maintain the integrity of the bass response. Proper gain staging on your amplifier will protect the voice coils and ensure long-term reliability.
Before You Buy This Subwoofer
Before you buy, verify your amplifier matches the dual 4-ohm voice coil. This configuration allows you to wire the coils in series or parallel, giving you flexibility in matching impedance. You must also ensure your enclosure is sealed and meets the minimum volume requirement of 0.35 cubic feet. Using an incorrect enclosure type can damage the driver or degrade performance significantly. The 84 Ohms sensitivity rating indicates this subwoofer requires adequate power to reach optimal output levels. Pairing it with a low-efficiency amp may result in weak bass response. Routine upkeep is minimal, but keep the magnet area clear of dust to maintain thermal efficiency. This model fits well among other sealed subwoofers in Subwoofers & Home Speakers for compact vehicles. It suits buyers who prioritize tight bass over sheer volume. Check your wiring gauge and power supply capacity before finalizing your purchase to ensure reliable operation over time.
Check before you buy
- Verify amplifier impedance matches dual 4-ohm configuration.
- Ensure sealed enclosure meets 0.35 cubic feet minimum.
- Check amplifier power output against 400W continuous rating.
- Confirm wiring gauge supports current requirements.
- Inspect mounting space for 11.8-inch cubic footprint.
The product at a glance
Audison APS 10D 10-inch Sealed Subwoofer
Best for: tight bass in small sealed enclosures
- Woofer Size
- 10"
- Power Handling
- 400W Continuous, 800W Peak
- Impedance
- 4 Ω + 4 Ω
- Sensitivity
- 84 Ohms
- Enclosure Type
- Sealed
- Dimensions
- 11.8 × 11.8 × 11.8 inches
View on Amazon: Audison APS 10D 10-inch Sealed Subwoofer Affiliate link
The Audison APS 10D is a 10-inch subwoofer designed for sealed enclosures with a minimum volume of 0.35 cubic feet. It features dual 4-ohm voice coils and handles 400 watts continuous power. The unit weighs 5.51 pounds and uses a ferrite magnet. You will get tight, controlled bass suitable for smaller spaces. This subwoofer suits listeners who prioritize accuracy over raw volume.
Pros
- 400W continuous power handling
- Dual 4-ohm voice coils
- Compact 11.8-inch cube design
- Optimized for sealed enclosures
Cons
- Low 84dB sensitivity limits efficiency
- Requires a sealed enclosure setup
- No included mounting hardware
Good fit if
- You have a small sealed box available
- You want precise, tight bass response
- You prefer a compact footprint
Skip if
- You need high output for large rooms
- You plan to use a ported enclosure
- You want a passive subwoofer
Verdict: Audison APS-10D 10-Inch Sealed Subwoofer delivers focused low-end for tight spaces. It fits buyers who value sealed-box accuracy over sheer volume.
Specifications side by side
| Spec | Audison APS 10D 10-inch Sealed Subwoofer |
|---|---|
| Woofer Size | 10" |
| Power Handling | 400W Continuous, 800W Peak |
| Impedance | 4 Ω + 4 Ω |
| Sensitivity | 84 Ohms |
| Enclosure Type | Sealed |
| Dimensions | 11.8 × 11.8 × 11.8 inches |
| Weight | 5.51 pounds |
| Color | black |
| Model | APS-10D |
Frequently asked questions
Is the Audison APS 10D suitable for small cars with limited trunk space?
Yes, this subwoofer is designed for tight spaces. It measures 11.8 inches in width, height, and length, creating a compact cubic footprint. The sealed enclosure design allows it to fit well in smaller vehicles without requiring a massive cabinet, delivering focused low-end output.
What type of enclosure does the Audison APS 10D require?
It requires a sealed enclosure. This design choice prioritizes tight, accurate bass over sheer volume. You must ensure your box is properly sealed to achieve the intended sound quality, as the driver is optimized for this specific acoustic environment.
How much power can the Audison APS 10D handle?
The unit handles 400 watts of continuous power and 800 watts of peak power. This rating ensures robust performance when paired with a compatible amplifier. The dual 4-ohm voice coil provides flexibility for matching your system's impedance requirements.
Does the Audison APS 10D have a dual voice coil?
Yes, it features a dual 4-ohm voice coil. This configuration allows you to wire the coils in series or parallel. This flexibility helps you match the subwoofer to various amplifier outputs, ensuring optimal power delivery and system integration.
What are the physical dimensions of the Audison APS 10D subwoofer?
The subwoofer measures 11.8 inches in width, height, and length. It weighs 5.51 pounds. These uniform dimensions simplify installation in tight spaces, such as under seats or in custom sealed boxes, while maintaining a sturdy build for reliable performance.
Can I use the Audison APS 10D in a ported enclosure?
No, it is specifically designed for sealed enclosures. The product data specifies a sealed enclosure type. Using it in a ported box may not deliver the intended tight bass response and could affect performance. Stick to sealed designs for best results.