Greenland Home Fashions Polk Audio TSi400 Floorstanding Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
In this greenland home fashions polk audio tsi400 floorstanding review, we look at the Polk Audio TSi400, a single floorstanding loudspeaker designed for versatile high-performance audio. The unit measures 38.9 inches in height and weighs 32 pounds, making it a substantial presence in any room. Two key specifications define its character: a frequency response range of 34 to 25 kHz and a power handling capacity of 20 to 200 watts per channel. These numbers suggest a speaker capable of covering a wide sonic spectrum while accommodating various amplifier outputs. You get a black finish that blends into most decor, but the focus remains on the internal driver configuration and electrical requirements for proper operation.
What stands out
- Three 5.25-inch bi-laminate organic fiber cone woofers for robust mid-bass performance
- 1-inch silk/polymer composite Dynamic Balance dome tweeter for detailed high frequencies
- Frequency response spans from 34 Hz to 25 kHz for wide coverage
- Power handling accepts 20 to 200 watts per channel for flexible amplification
- Compact footprint with a width of 7 inches and depth of 14.3 inches
Who it fits
Good fit for
You should consider this speaker if you need a floorstanding unit that fits into tighter spaces without sacrificing output. The 7-inch width and 32-pound weight make it manageable for smaller living areas or bedrooms. The wide power handling range means you can pair it with entry-level receivers or more powerful amplifiers, depending on your budget and setup. If you want a single speaker that covers a broad frequency range from deep lows to crisp highs, the 34 Hz to 25 kHz response offers a balanced sound signature suitable for movies and music alike.
Who should skip it
You might want to look elsewhere if you require extreme low-frequency extension below 34 Hz, as this speaker may not deliver the deepest sub-bass impact without additional subwoofers. The 20-watt minimum power requirement means very low-output amplifiers might struggle to drive the speakers to sufficient volumes. Additionally, if you need a pair of speakers for a full stereo setup, this listing is for a single unit, so you will need to purchase two separately. The black finish is fixed, so it may not match light-colored decor schemes without painting.
Verdict: The Polk Audio TSi400 offers a practical floorstanding solution with a wide frequency response and flexible power handling. Its compact dimensions make it suitable for smaller rooms, provided you have adequate amplification.
Polk Audio TSi400 Key Specs Explained
Speaker Type: Floorstanding
This speaker stands on the floor rather than sitting on a shelf. You get better bass response because the drivers are closer to the ground, which helps sound reflect off the floor naturally. This design suits large rooms where you want full-range audio without needing a separate subwoofer. It also saves shelf space, making it ideal for living rooms or home theaters where you need high performance from a single unit.
Power Handling: 20-200 watts/channel
The speaker needs at least 20 watts to reach good volume and can handle up to 200 watts without damage. This wide range means you can use a modest receiver or a powerful amplifier. If you have a high-end amp, you can drive the speaker harder for dynamic sound. If you have a basic stereo, it will still work well at moderate volumes. This flexibility helps you match the speaker to your existing gear.
Woofer Size: 5.25 inches
The three 5.25-inch woofers handle the low-frequency sounds like drums and bass lines. This size is standard for floorstanding speakers, offering a good balance between punch and clarity. It allows the speaker to produce deeper notes than bookshelf models but may not match the physical impact of larger 8-inch drivers. When shopping, compare this to other floorstanders to see if you need more bass depth or if this size fits your room acoustics.
Frequency Response: 34-25KHz
This range covers sounds from very low bass at 34Hz to high treble at 25KHz. It ensures you hear the full spectrum of music, from deep rumble to crisp cymbals. The 34Hz lower limit is respectable for floorstanding speakers, though it may not go as deep as dedicated subwoofers. The 25KHz upper limit covers human hearing well. Check this spec against competitors to ensure it matches your listening preferences for detailed highs and solid lows.
Design and Build Specs
According to the listing, the Polk Audio TSi400 is a floorstanding speaker finished in black. The cabinet measures 38.9 inches in height, 14.3 inches in length, and 7 inches in width. It weighs 32 pounds. This size and weight require a stable floor surface. You should place it on a solid stand or carpet to prevent tipping. The vertical design allows the drivers to sit closer to the ground, which helps sound reflect naturally off the floor.
The driver layout includes one 1-inch silk and polymer composite Dynamic Balance dome tweeter. It also features three 5.25-inch bi-laminate organic fiber cone woofers. The woofer size is consistent with the listed 5.25-inch specification. This configuration supports a frequency response range from 34 Hz to 25 kHz. The three woofers help manage low frequencies, while the dome tweeter handles high frequencies. This split allows for clear audio across a wide range.
Power handling is rated between 20 and 200 watts per channel. This range suggests you can use a variety of amplifiers. Lower power amps may drive the speaker at moderate volumes. Higher power amps can handle dynamic peaks. The model number is AM6205-B|4. The single unit is designed for versatile high-performance audio. The black finish blends into most room decors. You get a substantial presence without cluttering the visual space.
Setup and Everyday Use Guide
Setting up the Polk Audio TSi400 requires attention to its physical footprint and weight. The cabinet measures 38.9 inches in height, 14.3 inches in length, and 7 inches in width. It weighs 32 pounds. You need a stable, flat surface to support this weight. The floorstanding design places drivers closer to the ground, which helps sound reflect off the floor naturally. This positioning improves bass response compared to shelf-mounted options. You should place the speaker away from walls if you want to control the low-end output, as the floor interaction is significant. The unit accepts an amplifier or receiver with a power output between 20 and 200 watts per channel. This range allows you to drive the speaker with modest home theater receivers or more powerful stereo amps. The recommended amplification ensures the three 5.25-inch woofers and the 1-inch silk/polymer composite dynamic balance dome tweeter operate within their limits. The frequency response spans from 34 to 25 kHz. This wide range means the speaker can handle deep bass notes and high-frequency details without strain. Daily use involves connecting standard speaker wire to the binding posts. The black finish blends into most living spaces. You do not need special calibration tools. The specs suggest a straightforward installation. You place it, connect the wires, and power on your source. The versatile design fits various room sizes, provided you have the floor space for the 38.9-inch height. The build quality supports long-term use in a standard home audio setup.
Before You Buy This Speaker
The Polk Audio TSi400 requires an amplifier capable of delivering 20 to 200 watts per channel. You must verify that your receiver meets this power handling specification to avoid damage or poor performance. The speaker covers frequencies from 34 Hz to 25 kHz. This wide range means it handles deep bass and high treble, but you may still need a dedicated subwoofer for the lowest frequencies below 34 Hz. The black finish matches most home theater setups. However, you should check your room dimensions against the 38.9-inch height and 14.3-inch depth. Ensure you have stable flooring for the 32-pound weight. This floorstanding model sits alongside bookshelf options in our guide. It suits those who prioritize bass output from a single unit without sacrificing vertical space for shelf mounts.
Check before you buy
- Verify your amplifier outputs 20 to 200 watts per channel.
- Check if your room fits the 38.9-inch height and 7-inch width.
- Confirm you need a subwoofer for frequencies below 34 Hz.
- Ensure your flooring can support the 32-pound weight safely.
- Match the black finish with your existing home theater decor.
The product at a glance
Polk Audio TSi400 Floorstanding Speaker
Best for: single high-power floorstanding audio
- Speaker Type
- Floorstanding
- Woofer Size
- 5.25"
- Power Handling
- 20-200 watts/channel
- Dimensions
- 14.3 × 7 × 38.9 inches
- Weight
- 32 pounds
View on Amazon: Polk Audio TSi400 Floorstanding Speaker Affiliate link
The Polk Audio TSi400 is a floorstanding speaker designed for high-performance audio. It features three 5.25-inch woofers and a 1-inch silk dome tweeter. The frequency response spans 34 to 25 kHz. It handles 20 to 200 watts per channel. This speaker suits you if you need a tall, single unit for a living room or home theater setup.
Pros
- Three 5.25-inch bi-laminate woofers for rich bass
- 1-inch silk/polymer composite Dynamic Balance dome tweeter
- Wide 34-25 kHz frequency response
- Handles 20-200 watts per channel
Cons
- Single unit only, no pair included
- No subwoofer output listed
- Heavy at 32 pounds
Good fit if
- You want a single tall speaker for stereo sound
- You need a speaker that handles up to 200 watts
- You prefer a black finish for your room
Skip if
- You need a matched pair of speakers
- You require a compact bookshelf size
- You want built-in wireless connectivity
Verdict: Polk Audio TSi400 Black Floorstanding Speaker offers robust power handling and a wide frequency range for a single floorstanding unit. It fits you if you need a tall, powerful speaker for a dedicated listening space.
Specifications side by side
| Spec | Polk Audio TSi400 Floorstanding Speaker |
|---|---|
| Speaker Type | Floorstanding |
| Woofer Size | 5.25" |
| Power Handling | 20-200 watts/channel |
| Dimensions | 14.3 × 7 × 38.9 inches |
| Weight | 32 pounds |
| Color | Black |
| Model | AM6205-B|4 |
Frequently asked questions
What are the exact dimensions of the Polk Audio TSi400?
The cabinet measures 38.9 inches in height, 14.3 inches in length, and 7 inches in width. These dimensions define its physical footprint on the floor. You must ensure your listening space can accommodate this vertical height and depth for proper placement.
How much does the Polk Audio TSi400 weigh?
The unit weighs 32 pounds. This mass provides stability but requires a solid floor surface to prevent vibration. You should place it on a level area to maintain structural integrity and acoustic performance during use.
Is the Polk Audio TSi400 a floorstanding speaker?
Yes, it is a floorstanding loudspeaker. This design places drivers closer to the ground for natural bass reflection. It stands independently without needing a shelf, making it suitable for dedicated listening areas where height is available.
What color is the Polk Audio TSi400?
The speaker is finished in black. This neutral color helps it blend into most room decors. You can place it against walls or in corners without it drawing excessive visual attention from the room's primary features.
What is the model number for this Polk Audio speaker?
The model identifier is AM6205-B|4. This code distinguishes it from other units in the TSi series. You can use this number to verify compatibility with accessories or to find specific replacement parts if needed later.
Who makes the Polk Audio TSi400?
The brand listed is Greenland Home Fashions. Polk Audio manufactures the audio components within this package. You receive a single floorstanding unit designed for high-power handling and wide frequency range coverage in your home setup.