KICKER 50CWCD124 CompC 12" Subwoofer Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This kicker 50cwcd124 compc 12 subwoofer review covers the Kicker 12" Dual 4-Ohm CompC Subwoofer. It is a 12-inch driver with a dual 4-ohm voice coil configuration. The unit measures 13.1 inches square and weighs 11.9 pounds. Its construction uses a polypropylene cone and polyurethane surround. Kicker includes signature yellow stitching for durability. The design also features perimeter venting for cooling. These specs define its physical and electrical profile for your installation.
What stands out
- 12-inch woofer size for deep bass output
- Dual 4-Ohm impedance for flexible wiring options
- Polypropylene cone reduces distortion at high volumes
- Perimeter venting slots keep the motor cool
- Yellow stitching bonds the surround to the cone
Who it fits
Good fit for
You should consider this subwoofer if you need a 12-inch driver with a dual 4-ohm voice coil. This impedance allows you to wire multiple units easily in series or parallel. The forced-air cooling system suits high-power installations where heat management matters. The robust polyurethane surround and polypropylene cone offer reliable performance for daily listening. If you prioritize thermal durability and flexible amplifier matching, this model fits your setup.
Who should skip it
Skip this option if you require a single 4-ohm voice coil. The dual 4-ohm design changes wiring strategies and may not match amplifiers expecting a single coil load. You might also look elsewhere if you need a smaller 10-inch or 8-inch driver for tight enclosures. This unit is 13.1 inches square and weighs 11.9 pounds, requiring adequate space. If your box volume is limited, the 12-inch size may not fit your constraints.
Verdict: The Kicker CompC 12-inch dual 4-ohm subwoofer offers reliable thermal management and flexible wiring for specific installations. It suits users who need a durable, high-power driver with a dual coil configuration.
Key specs explained for this subwoofer
Woofer Size: 12"
A 12-inch driver is a standard size for home audio systems. This diameter allows the subwoofer to move enough air to produce deep bass frequencies. You will notice strong low-end response in movies and music. Compared to smaller 8-inch or 10-inch models, this unit offers more physical displacement. It suits rooms where you want impactful bass without requiring a massive enclosure.
Impedance: Dual 4-Ohm
Dual 4-ohm voice coils give you wiring flexibility. You can wire the coils in series for an 8-ohm load or in parallel for a 2-ohm load. This lets you match the subwoofer to various amplifier outputs. If your amplifier handles lower impedance, you can draw more power. This spec helps you optimize performance based on your specific receiver or amp capabilities.
Weight: 11.9 pounds
This weight indicates a solid build with a substantial motor and cone assembly. Heavier drivers often provide better stability during high excursion. You will find it sturdy enough for most enclosures without being overly burdensome. Compare this to lighter foam-cone subs that may lack rigidity. The mass helps control movement, reducing unwanted resonance during intense bass hits.
Dimensions: 13.1 x 13.1 x 6.81 inches
These physical measurements define the space required for installation. The 13.1-inch square footprint fits standard round or square cutouts with a small margin. The 6.81-inch depth determines the enclosure depth you need. Ensure your cabinet allows for this clearance. Accurate dimensions help you plan your build or placement. It ensures the unit sits securely without protruding excessively into your room space.
Design And Build Quality
The Kicker 50CWCD124 CompC subwoofer features a 12-inch polypropylene cone. This injection-molded material is lightweight and rigid. It helps eliminate distortion during high-volume playback. The cone is bonded to a ribbed polyurethane surround. Kicker uses signature yellow stitching for this connection. The listing states this stitching creates a robust bond. This design ensures top-tier reliability and long-lasting performance. You get a driver built to handle stress.
Dimensions are 13.1 inches square with a depth of 6.81 inches. The unit weighs 11.9 pounds. These measurements define the cutout space required for installation. The compact footprint allows placement in various enclosures. The yellow finish is visible on the stitching and surround. This aesthetic choice does not affect acoustic output. It simply identifies the Kicker branding on the driver. The physical layout is standard for a 12-inch driver.
The motor structure includes perimeter venting slots. These slots allow constant air circulation around the motor. The listing explains that this keeps the motor cool. Hot air is pushed out as the cone moves. Cool air is drawn in to replace it. This forced-air cooling mechanism maintains the voice coil at an optimal temperature. The design also uses high-strength Spiralead tinsel leads. These leads connect the voice coil to the terminals. The combination of cooling features and sturdy leads supports sustained performance.
Setup And Daily Use Guide
Installing this subwoofer requires careful attention to its physical dimensions and electrical configuration. The unit measures 13.1 inches square with a depth of 6.81 inches. You must ensure your enclosure provides adequate space for these measurements. The driver weighs 11.9 pounds, so your mounting hardware must support this mass securely. A loose mount can cause rattling or damage over time.
The dual 4-ohm voice coil offers wiring flexibility. You can wire the coils in series to create an 8-ohm load or in parallel for a 2-ohm load. This allows compatibility with various amplifier outputs. Check your amplifier’s minimum impedance rating before finalizing your wiring scheme. Connecting to an amp that cannot handle the resulting load may cause overheating or failure.
Daily operation benefits from the subwoofer’s thermal management features. The perimeter venting slots and forced-air cooling mechanism help keep the voice coil at an optimal temperature. As the cone moves, hot air is pushed out while cool air is drawn in. This circulation enhances durability during extended listening sessions. You can run the subwoofer at high volumes without immediate concern for thermal compression.
The polypropylene cone and ribbed polyurethane surround are designed for longevity. The signature yellow stitching reinforces the bond between these materials. This construction ensures reliable performance over time. You do not need to worry about the surround degrading quickly under normal use. The speaker is built to maintain its structural integrity through frequent use. Proper enclosure tuning will further enhance its output capabilities.
Installation And Setup Checks
Before you buy this Kicker 50CWCD124 CompC, verify your enclosure volume. The 12-inch driver requires specific air space to function correctly. You must match the dual 4-ohm voice coil to your amplifier’s output. Ensure your amp can handle two 4-ohm loads without distortion. The forced-air cooling system relies on proper airflow, so seal your box tightly. Use high-quality speaker wire to connect the subwoofer to your receiver. Regularly inspect the yellow stitching and polyurethane surround for wear. Keep the perimeter venting slots clear of dust. This model fits well in home theater setups or car audio systems. Compare its 11.9-pound weight and 6.81-inch depth with other options on the page. Ensure your mounting hardware supports the driver’s mass. Check your amplifier’s power handling limits before connecting. This subwoofer delivers accurate bass, but only if installed correctly. Proper setup ensures long-term reliability and distortion-free sound.
Check before you buy
- Verify amplifier can handle dual 4-ohm loads
- Ensure enclosure volume matches manufacturer recommendations
- Check mounting hardware supports 11.9-pound weight
- Inspect sealing for proper forced-air cooling
The product at a glance
Kicker 12" Dual 4-Ohm CompC Subwoofer
Best for: custom enclosure builds needing thermal management
- Woofer Size
- 12"
- Impedance
- Dual 4-Ohm
- Dimensions
- 6.81 × 13.1 × 13.1 inches
- Weight
- 11.9 pounds
View on Amazon: Kicker 12" Dual 4-Ohm CompC Subwoofer Affiliate link
The Kicker 50CWCD124 CompC is a 12-inch subwoofer with dual 4-ohm impedance. It features a polypropylene cone and polyurethane surround designed for durability. The unit measures 6.81 inches in depth and weighs 11.9 pounds. It includes forced-air cooling to manage voice coil temperature. This subwoofer suits you if you need a robust component for a custom enclosure.
Pros
- Dual 4-Ohm impedance for flexible wiring options
- 12-inch polypropylene cone for distortion-free sound
- Forced-air cooling slots keep the motor cool
- Yellow stitching reinforces the surround bond
Cons
- Requires a custom enclosure for installation
- No included mounting hardware or wiring kit
- Heavy at 11.9 pounds for handling
Good fit if
- You are building a custom subwoofer enclosure
- You need dual 4-ohm voice coils for specific amplifier setups
- You prioritize thermal management and durability in your components
Skip if
- You need a pre-boxed subwoofer ready for immediate use
- You require a single 4-ohm or 2-ohm voice coil configuration
- You are looking for a lightweight component for portable setups
Verdict: Kicker CompC 12" Dual 4-Ohm Subwoofer delivers reliable performance for custom builds. It fits you if you want a durable 12-inch driver with advanced cooling for high-volume listening.
Specifications side by side
| Spec | Kicker 12" Dual 4-Ohm CompC Subwoofer |
|---|---|
| Woofer Size | 12" |
| Impedance | Dual 4-Ohm |
| Dimensions | 6.81 × 13.1 × 13.1 inches |
| Weight | 11.9 pounds |
| Color | yellow |
| Model | 50CWCD124 |
Frequently asked questions
What are the physical dimensions of the Kicker 50CWCD124 CompC subwoofer?
The Kicker 50CWCD124 CompC measures 13.1 inches in width and 13.1 inches in height. Its depth is 6.81 inches. The unit weighs 11.9 pounds. You need to account for this square footprint and depth when designing your enclosure to ensure a proper fit.
What impedance configuration does this subwoofer use?
This subwoofer features a dual 4-ohm voice coil configuration. This setup allows for flexible wiring options. You can wire the coils in series or parallel to match your amplifier's specific impedance requirements for optimal performance.
Is the Kicker 50CWCD124 suitable for custom enclosure builds?
Yes, it is highly suitable for custom enclosure builds. The design focuses on thermal management and durability. You will benefit from its robust construction if you plan to build a custom box tailored to your specific listening environment and space constraints.
What material is used for the cone on this driver?
The cone is made from injection-molded polypropylene. This material is both lightweight and rigid. It helps eliminate distortion during high-volume playback. You will get cleaner bass response compared to heavier cone materials that might flex under stress.
How much does the Kicker 50CWCD124 weigh?
The driver weighs 11.9 pounds. This weight indicates a solid build quality. You should ensure your mounting hardware and enclosure structure can support this mass securely. Proper mounting is essential for maintaining performance and preventing vibration issues.
What is the model number for this 12-inch subwoofer?
The model number is 50CWCD124. This identifier corresponds to the 12-inch CompC series. You can use this number to verify compatibility with your existing system components or to find specific installation guides and technical documentation from the manufacturer.