Skar Audio Dual 10" Complete 4 Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This skar audio dual 10 complete 4 review covers the Skar Audio Dual 10" EVL Bass Package. It is an all-in-one car audio solution designed for drivers seeking high-output bass without complex assembly. The system features dual 10-inch subwoofers mounted in a custom vented enclosure. It delivers 2,000 watts of continuous RMS power and peaks at 4,000 watts. The package includes a Class D amplifier and necessary wiring. You get a complete setup ready for installation. This spec-focused look explains how these numbers translate to real-world performance and fitment in your vehicle.
What stands out
- Dual 10-inch subwoofers pre-wired in a vented enclosure
- 2,000 watts RMS and 4,000 watts peak power output
- Includes RP-2000.1D Class D amplifier and 1/0 gauge wiring
- Compact dimensions of 38.3 x 23.2 x 17.8 inches
- Total package weight of 136 pounds
Who it fits
Good fit for
You should consider this package if you want a plug-and-play solution for your vehicle. The included Class D amplifier and heavy-gauge wiring mean you do not need to source separate components. The dual 10-inch drivers provide substantial low-end response suitable for music genres that rely on deep bass. If you prefer a tidy installation with a pre-loaded vented box, this complete kit saves you time and effort. It fits well in trucks or SUVs where space allows for a 136-pound unit.
Who should skip it
You might want to look elsewhere if you prefer single-subwoofer configurations. This package is built around dual 10-inch drivers, so a single 10-inch or 12-inch option would better match your space or sound preference. The vented enclosure design also limits your choices if you are a fan of sealed box acoustics. Additionally, the large physical footprint requires ample trunk or cargo area. If you need a lighter system or a different amplifier configuration, other variations in this lineup may suit your needs better.
Verdict: This complete package offers a convenient, high-power bass solution for those who prefer a pre-assembled setup. The included amplifier and wiring simplify installation while delivering strong output.
Key specs for this package
2,000 watts RMS power
This rating shows the continuous power the system handles. It indicates steady output rather than short bursts. You get consistent bass during long drives. Compare this to lower RMS ratings for louder, clearer sound. It suits listeners who want strong, reliable low-end performance without distortion at high volumes.
Dual 10-inch subwoofers
Two drivers work together to move more air. This setup creates deeper bass with less strain on each unit. You benefit from fuller sound coverage in your vehicle. When shopping, consider single-driver options for space savings. Dual drivers generally offer better efficiency and smoother bass response for music lovers.
Vented custom enclosure
The box has an opening to enhance low-frequency output. This design boosts bass impact and efficiency. You get more volume from the same power. Compare this to sealed boxes for tighter, cleaner sound. Vented enclosures are ideal if you prefer punchy, deep bass for hip-hop or rock genres.
136 pounds weight
This total weight includes subs, amp, and enclosure. It ensures stability but requires a strong vehicle floor. You need adequate support to prevent damage during transit. Compare this with lighter kits for easier installation. The heavy build suggests robust components that can handle high power levels safely.
Design and Build Overview
The Skar Audio Dual 10" EVL Bass Package arrives as a complete, all-in-one solution. According to the listing, it includes dual 10-inch subwoofers pre-wired and loaded into a custom vented enclosure. This integrated design saves you the effort of assembling components separately. The system also comes with a Skar Audio RP-2000.1D Class D amplifier and a 1/0 gauge wiring kit. Having these elements bundled ensures compatibility and simplifies the installation process for your vehicle.
Physical dimensions are substantial. The enclosure measures 38.3 inches in width, 17.8 inches in height, and 23.2 inches in length. It weighs 136 pounds. This mass suggests a sturdy build capable of handling high power output. The black finish is standard for car audio gear, allowing it to blend into most trunk or cargo areas without drawing unwanted attention. The vented design of the enclosure is intended to enhance bass response and efficiency.
You should verify your vehicle’s cargo space before purchase. The width and length require a flat, open area to accommodate the unit securely. The weight means you will need assistance for installation. The tight fit of the components inside the enclosure protects the drivers during transport. This robust construction supports the claimed 4,000 watts peak power handling. It is built for drivers who want a powerful, ready-to-install bass system without custom fabrication.
Setup And Everyday Use Guide
You receive a fully assembled unit that weighs 136 pounds. The dimensions are 38.3 inches wide, 17.8 inches high, and 23.2 inches long. This substantial size requires a vehicle with adequate cargo space. You must ensure your trunk or rear area can accommodate this footprint. The package includes a Skar Audio rp-2000.1D class D amplifier. This component is integrated into the system, so you do not need to mount a separate amp. The listing notes that the dual 10-inch subwoofers come pre-wired. This feature simplifies the installation process significantly. You connect the included 1/0 gauge wiring kit to your vehicle’s electrical system. Proper grounding and power connections are essential for safe operation. The system delivers 2,000 watts RMS power. This rating indicates the continuous power handling capacity. You can expect steady output during extended listening sessions. The peak power reaches 4,000 watts. This figure represents short-term power bursts. The custom vented enclosure is designed to enhance bass response. You will notice tight and accurate low-end frequencies. The black finish provides a discreet look inside your vehicle. The system is engineered for easy installation. You should follow standard car audio wiring protocols. Ensure your vehicle’s alternator can support the electrical load. The integrated design reduces the number of components you need to manage. This setup is ideal for those who want high-output bass without complex assembly. The pre-wired nature of the subwoofers means fewer connection points to check. This reduces the potential for installation errors. You can focus on securing the enclosure properly. The weight distribution should be considered when loading your vehicle. The compact footprint relative to the power output makes it efficient for daily driving. You get consistent performance without needing to adjust settings frequently.
Before You Buy This Package
You need to verify your vehicle can handle this unit. The enclosure measures 38.3 inches wide and weighs 136 pounds. Ensure your trunk or cargo area has sufficient depth and height. The height varies by variation, so check the specific listing for your chosen option. You must confirm your vehicle’s electrical system supports the rp-2000.1D amplifier. This class D unit draws significant current. Verify your alternator and battery can sustain the load during heavy bass playback. Proper grounding is essential for stable performance. You should also check if your vehicle’s existing wiring is adequate or if you need to upgrade the gauge. This package is a complete solution, but fitment is critical. It differs from single-driver options in size and power. If you have limited space, consider the single 10-inch or 12-inch variants. Always measure your installation space before purchasing. Proper ventilation around the enclosure is necessary to prevent overheating. Keep the unit secure to avoid damage during transit.
Check before you buy
- Measure trunk space for 38.3-inch width and 23.2-inch length.
- Confirm vehicle electrical system handles 2,000 watts RMS load.
- Check specific height variation for your chosen option.
- Ensure adequate ventilation around the vented enclosure.
- Verify grounding points for stable amplifier performance.
The product at a glance
Skar Audio Dual 10" EVL Bass Package
Best for: high-output car audio installations
- Woofer Size
- Dual 10"
- Amplifier Type
- Class D
- Enclosure Type
- Vented
- Impedance
- Dual 4 Ohm
- Dimensions
- 23.2 × 38.3 × 17.8 inches
- Weight
- 136 pounds
View on Amazon: Skar Audio Dual 10" EVL Bass Package Affiliate link
This all-in-one package includes a dual 10-inch subwoofer loaded in a vented enclosure. It comes with a 2,000-watt RMS Class D amplifier and wiring kit. The unit measures 38.3 by 23.2 by 17.8 inches and weighs 136 pounds. You get tight, accurate bass without complex setup. It suits car audio enthusiasts seeking a powerful, pre-wired solution.
Pros
- Dual 10-inch subwoofers for deep bass
- 2,000-watt RMS Class D amplifier included
- Pre-wired and loaded in vented enclosure
- Includes 1/0 gauge wiring kit
Cons
- Heavy at 136 pounds
- Large footprint at 38.3 inches wide
- No remote control mentioned
Good fit if
- You want a complete, pre-wired car audio system
- You need high RMS power for loud bass
- You have space for a large enclosure
Skip if
- You prefer lightweight, portable audio gear
- You need a compact, single-subwoofer setup
- You want to build your own enclosure
Verdict: Skar Audio Dual 10" EVL Bass Package delivers high power in a single unit. It fits buyers who want maximum bass output without building a custom box.
Specifications side by side
| Spec | Skar Audio Dual 10" EVL Bass Package |
|---|---|
| Woofer Size | Dual 10" |
| Amplifier Type | Class D |
| Enclosure Type | Vented |
| Impedance | Dual 4 Ohm |
| Dimensions | 23.2 × 38.3 × 17.8 inches |
| Weight | 136 pounds |
| Size | Dual 10" D4 Package With Amplifier |
| Color | Black |
| Model | EVL-2X10D4-RP-2000.1D-SKAR0ANL-OFC |
Frequently asked questions
What are the exact dimensions of the Skar Audio Dual 10 package?
The enclosure measures 38.3 inches wide, 17.8 inches high, and 23.2 inches long. These specific dimensions determine whether the unit fits in your vehicle. You must check your cargo space against these measurements before installation to ensure proper placement.
How much does the complete Skar Audio Dual 10 system weigh?
The total weight of the unit is 136 pounds. This substantial mass requires a sturdy vehicle floor or trunk area. You need to ensure your car can support this load without damaging the interior structure or suspension components during transport.
Does this package include an amplifier for the subwoofers?
Yes, the product name indicates it is a package with an amplifier. It is designed as an all-in-one solution for high-output car audio. You receive pre-wired components that integrate the power source directly with the dual 10-inch subwoofers for immediate use.
What size subwoofers are included in this Skar Audio unit?
The system features dual 10-inch subwoofers. These two drivers are mounted in a custom vented enclosure. This configuration allows for significant bass output, making it suitable for buyers who want maximum impact without building a custom box from scratch.
Is the Skar Audio Dual 10 suitable for high-output car audio?
Yes, it is best for high-output car audio installations. The design delivers high power in a single unit. You get consistent bass during long drives due to the 2,000 watts RMS rating, which indicates steady output rather than short bursts.
What is the model number for this Skar Audio bass package?
The model identifier is EVL-2X10D4-RP-2000.1D-SKAR0ANL-OFC. You can use this code to verify specific component details or replacement parts. It helps distinguish this dual 10-inch D4 package with amplifier from other variations in the Skar Audio lineup.